Operator Controls - Marine PC MPC-MLR User Manual

OPERATOR CONTROLS

On the right hand side of the Monitor bezel
are seven Operator Control buttons.
Power Button
Note: Monitor defaults to an AUTO-OFF state when
power is applied.
• The Power On/Off button is marked with
the I/O (Input/Output) symbol
• Momentarily pressing this button shall
turn ON or turn OFF the unit, and
• Blue LEDs glow behind the buttons when
the unit is powered on.
Optional Feature:
AUTO-ON state when power is applied. This
feature must be ordered when the Monitor is
ordered. It is not an add-on after the unit is
built.
Brightness Toggle
This toggle controls the brightness of the LCD Panel Display.
• The large sun toggle side, when repeatedly pressed or held down, shall cause the
Display's backlight brightness to increase
• The small sun toggle side, when repeatedly pressed or held down can be stepped
down in increments to the lowest setting, which is just above total black and suit-
able in very subdued light, as in night time operations, and
• The Monitor shall revert to a mid-range setting when the unit is powered off.
Select Button
The Select Button is the access point to the On-Screen Display (OSD) Source Screen
Menu. (See On-Screen Display.)
Up Button
The Up Button is an adjustment tool in the OSD Source Screen Menu. (See OSD
Screen Menu Parameters.)
Down Button
The Down Button is an adjustment tool in the OSD Source Screen Menu. (See OSD
Screen Menu Parameters.)
Source Button
The Source Button allows the user to switch between video signal sources attached to the Moni-
tor – Composite Video 1, 2 & 3, and VGA.
18
MPC-MLR-UM(A) 10/2009
Monitor defaults to an
Adjust the brightness of the Display to the lowest possible setting for
a given set of conditions and display characteristics. Doing so shall
provide the best viewing of the image, extend the lamp life of the
backlight and reduce the internal heat of the Display.
Power On/Off (I/O)
Button
Brightness Control Toggle
(large sun, small sun)
Select Button
Up Button
Down Arrow
Source Select Button