Troubleshooting
If...
You cannot take a
picture
Picture orientation is
not accurate
Flash does not fire
Battery life is short
Computer/connectivity problems
If...
The computer does
not communicate with
the camera
Slide Show does not
run on an external
video device
39
Try one or more of the following
■
Turn the camera off, then on again.
■
Depress shutter button all the way
■
Insert new or charged batteries
■
Wait until the ready light is green before attempting to
take another picture.
■
Transfer pictures to the computer
pictures from the camera
locations
(page
memory
(page
7).
■
Set the Orientation Sensor
■
Check flash setting, and change as needed
■
Wipe the contacts with a clean, dry cloth
inserting batteries in the camera.
■
Insert new or charged batteries
Try one or more of the following
■
Turn on the camera.
■
Insert new or charged batteries
■
Make sure USB cable is securely connected on camera (or
dock) and computer port
■
Make sure the EasyShare software is installed
■
Adjust the camera Video Out setting (NTSC or PAL,
page
21).
■
Make sure the external device settings are correct (see the
device's user's guide).
(page
(page
(page
24), switch image storage
18), or insert a card with available
(page
19).
(page
(page
(page
36).
(page
8).
2).
36), delete
(page
14).
(page
3) before
2).
2).
(page
30).