Picture quality problems
If...
The picture is too
dark or
underexposed
The picture is too
light
The picture is not
clear
Try one or more of the following
■
Use Fill flash
(page
not behind the subject.
■
Move so that the distance between you and the subject is
within the effective flash range (see
■
To automatically set exposure and focus, press the Shutter
button halfway and hold. When the ready light glows
green, press the Shutter button the rest of the way
down to take the picture.
■
Increase Exposure Compensation (see
■
Turn flash off
(page
■
Move so that the distance between you and the subject is
within the effective flash range (see
■
To automatically set exposure and focus, press the Shutter
button halfway and hold. When the ready light glows
green, press the Shutter button the rest of the way
down to take the picture.
■
Decrease Exposure Compensation (see
■
To automatically set exposure and focus, press the Shutter
button halfway and hold. When the ready light glows
green, press the Shutter button the rest of the way
down to take the picture.
■
Clean the lens
(page
■
Make sure camera is not in Close-up mode if you are more
than 27.6 in (70 cm) from your subject.
■
Place the camera on a flat, steady surface or use a tripod.
14) or change your position so light is
page
14).
page
46).
Troubleshooting
14).
page
18).
14).
page
18).
40