Install The Software - Kodak CX7330 User Manual

Installing the software

Install the software

1 Close all software applications that are open on your computer (including
anti-virus software).
2 Place the Kodak EasyShare software CD into the CD-ROM drive.
3 Install the software:
Windows OS-based computer—
choose Run from the Start menu and type d:\setup.exe where d is the
drive letter that contains the CD.
double-click the CD icon on the desktop, then click the Install
Mac OS X—
icon.
4 Follow the on-screen instructions to install the software.
Windows OS-based computer—
the most commonly used applications. Select Custom to choose the
applications you wish to install.
follow the on-screen instructions.
Mac OS X—
NOTE: When prompted, take a few minutes to electronically register your camera and software.
This lets you receive information regarding software updates and registers some of the
products included with the camera. You must be connected to your Internet service
provider to register electronically. To register later, see
5 Restart the computer. If you turned off anti-virus software, turn it back on.
See the anti-virus software manual for details.
For information on the software applications included on the Kodak EasyShare
software CD, click the Help button in the Kodak EasyShare software.
31
CAUTION:
Install Kodak EasyShare software
before connecting the camera or
optional dock to the computer.
Failure to do so may cause the
software to install incorrectly.
if the install window does not appear,
select Complete to automatically install
www.kodak.com/go/register.