DVD player and the video input jack on
the TV.
Tip
•
The video input jack on the TV may be labeled
as A/V IN, VIDEO IN, COMPOSITE or
BASEBAND.
•
This type of connection provides standard
picture quality.
Connect audio cables
Connect the audio from this DVD player to
the TV to allow sound output through the TV.
1
Connect the audio cables (supplied) to
the AUDIO OUT L/R jacks on this DVD
player and the audio input jacks on the
TV.
Route audio to other devices
Route the audio from this DVD player to other
devices to enhance audio play.
Connect to digital amplifier/receiver
DIGITAL
OUT
COAXIAL
AUDIO IN
DIGITAL IN
1
Connect a coaxial cable (not supplied)
to the COAXIAL/DIGITAL OUT jack
on this DVD player and the COAXIAL/
DIGITAL input jack on the device.
Tip
•
You can optimize the audio output (see
chapter 'Adjust settings' - [Audio Setup] >
[Digital Output]) for details.
Connect to analog stereo system
1
Connect the audio cables (supplied) to
the AUDIO OUT L/R jacks on this DVD
player and the audio input jacks on the
device.
Connect USB device
1
Connect the USB flash drive to the
(USB) jack on this DVD player.
Note
•
This DVD player can only play or view MP3,
WMA or JPEG files that are stored on such
devices.
•
Press
to access the content and play the
files.
AUDIO IN
EN
9