Expresscard Assembly - HP EliteBook 8560w Maintenance And Service Manual

ExpressCard assembly

Description
ExpressCard assembly for use in models without the Alcor chip upgrade
ExpressCard assembly for use in models with the Alcor chip upgrade
Before removing the ExpressCard assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service access cover (see
6. Remove the following components:
a.
b.
c.
d.
e.
f.
g.
Remove the ExpressCard assembly:
1. Position the system board upright.
Downloaded from LpManual.com Manuals
Battery on page
Hard drive (see Hard drive on page
Optical drive (see Optical drive on page
Keyboard (see Keyboard on page
Top cover (see Top cover on page
Video card fan/heat sink assembly (see
Processor heat sink (see
System board (see System board on page
48).
Service access cover on page
60)
65)
67)
71)
Video card fan/heat sink assembly on page
Processor heat sink on page
107)
Spare part number
652680-001
684793-001
50).
86)
Component replacement procedures 111
84)