Accessories; Technical Data - Hilti PM 2-P Operating Instructions Manual

Laser beam
2.4 Items supplied with the point laser (cardboard box version)
1 Point laser PM 2-P
1 Soft pouch
4 Batteries
1 Operating instructions
1 Manufacturer's certificate

3 Accessories

Designation
Tripod
Target plate
Telescopic brace
Universal adapter
Laser visibility glasses

4 Technical data

Right of technical changes reserved.
Range of the points
Accuracy 1
Self-leveling time
Laser class
Beam diameter
Self-leveling range
Automatic power-off
Operating status indicator
Power supply
1 Influences such as particularly high temperature fluctuations, dampness, shock, dropping, etc. can affect accuracy. Unless stated
otherwise, the tool was adjusted or calibrated under standard ambient conditions (MIL-STD-810F).
The laser beam blinks twice
every 10 seconds.
The laser beam blinks five
times and then remains per-
manently on.
The laser beam blinks rapidly.
Short designation
PMA 20
PMA 54/55
PUA 10
PMA 78
PUA 60
30 m
±3 mm at 10 m
3 s (typical)
Class 2, visible, 620 - 690 nm, ±10 nm (EN 60825-
1:2007 / IEC 60825 - 1:2007); class II (CFR 21 §1040
(FDA)
Distance 5 m: < 4 mm
Distance 20 m: < 16 mm
±4° (typical)
Activated after: 15 min
LED and laser beams
AA‑size batteries, Alkaline batteries: 4
The batteries are almost exhausted.
Automatic power-off has been deactiv-
ated.
The tool cannot level itself.
Description
The laser visibility glasses are not
protective glasses and thus do not
protect the eyes from laser beams.
As the laser visibility glasses restrict
color vision, they should be worn only
when working with the PM 2-P laser
tool. Do not wear the laser visibility
glasses while driving a vehicle on a
public road.
en
3