Samsung SyncMaster 150MP Owner's Instructions Manual page 27

Table 3. Troubleshooting – Image ( Continued )
What you see...
Screen is blank and
power indicator light is
steady amber or blinks
every 0.5 or 1 seconds
Image is not stable and
may appear to vibrate
Image is not centered
on the screen.
You need the monitor
driver software
Appendix
Suggested Actions
The monitor is using its power
management system.
Move the computer's mouse or
press a key on the keyboard
Check that the display
resolution and frequency from
your PC or video board is an
available mode for your monitor.
On your computer check: Control
Panel, Display, Settings
If the setting is not correct, use
your computer utility program to
change the display settings.
NOTE: Your monitor supports multiscan display functions within
the following frequency domain:
Horizontal frequency:
Vertical frequency:
Maximum refresh rate:
Adjust the horizontal and
vertical position.
Download the driver from WWW
pages:
http://samsungelectronics.com/
support/downloads/monitor/
index.html
English
Power Saver, page 23.
Display Modes, page 30.
Installing the Video Driver,
page 6.
150MP : 30 kHz – 69 kHz
170MP : 30 kHz – 81kHz
56 Hz – 85 Hz
150MP: 1024 x 768 @ 85 Hz
170MP: 1280 x 1024 @ 76Hz
H-Position, page 13.
V-Position, page 13.
25
Reference