Battery Charge - Panasonic KX-TG2411C Operating Instructions Manual

TG2411C(e).book Page 9 Wednesday, January 26, 2005 4:10 PM

Battery charge

Place the handset on the base unit for 6
hours before initial use.
L The unit will beep once and the
CHARGE indicator will light.
CHARGE indicator
Note:
L To ensure the battery charges properly,
clean the charge contacts of the handset
and base unit with a soft, dry cloth once
a month. Clean more often if the unit is
subject to grease, dust, or high humidity.
Recharging the battery
Recharge the battery when the
RECHARGE indicator flashes or the
handset beeps intermittently while it is in
use.
Note:
L Recharge the handset battery for more
than 15 minutes.
Battery performance
After your Panasonic battery is fully
charged, you can expect the following
performance:
Operation
While in use
(talking)
While not in use
(standby)
While using the
clarity booster
feature (page 14)
*1 Handset is off the base unit but not in
use.
Note:
L Battery power is consumed whenever
the handset is off the base unit, even
when the handset is not in use. The
longer you leave the handset off the
base unit, the shorter you can actually
talk on the handset. Actual battery
performance depends on a combination
of how often the handset is in use and
how often it is not in use.
L Once the battery is fully charged, you do
not have to charge it again until the
RECHARGE indicator flashes. This will
maximize the battery life.
RECHARGE
indicator
Preparation
Operating time
Up to 5 hours
Up to 11 days
*1
Up to 3 hours
9