Paper Handling Difficulties Uu - Brother MFC-8520DN User Manual

Printing difficulties (continued)
Difficulties
The machine does not print on both
sides of the paper even though the
printer driver setting is Duplex.
The machine does not change to
Direct Print mode when a USB
flash memory drive is connected to
the USB direct interface.
Cannot perform 'Page Layout'
printing.
Print speed is too slow.
The machine does not print from
® ®
Adobe Illustrator .
Poor print quality
Paper handling difficulties
Difficulties
The machine does not feed paper.
The machine does not feed paper
from the MP tray.
112
Suggestions
Check the paper size setting in the printer driver. You need to choose A4 paper
2
(60 to 105 g/m) .
When the machine is in Deep Sleep mode, the machine does not wake up even
if you connect a USB flash memory drive to the USB direct interface. Press
Stop/Exit to wake up the machine.
Check that the paper size setting in the application and in the printer driver are the
same.
Try changing the printer driver setting. The highest resolution needs longer data
processing, sending and printing time.
Check that the back cover is firmly closed and the duplex tray is firmly installed.
Add optional memory.
uu Advanced User's Guide: Installing extra memory
Try to reduce the print resolution.
uu Software User's Guide: Printing (for Windows
uu Software User's Guide: Printing and Faxing (for Macintosh)
See Improving the print quality uu page 122.
Suggestions
If the LCD shows the Paper Jam message and you still have a problem, see Error
and maintenance messages uu page 90.
If there is no paper, load a new stack of paper into the paper tray.
If there is paper in the paper tray, make sure it is straight. If the paper is curled,
you should straighten it. Sometimes it is helpful to remove the paper, turn the stack
over and put it back into the paper tray.
Reduce the amount of paper in the paper tray, and then try again.
Make sure that manual feed mode is not chosen in the printer driver.
Clean the paper pick-up roller.
See Cleaning the paper pick-up rollers uu page 86.
Make sure that MP Tray is chosen in the printer driver.
Fan the paper well and put it back in the tray firmly.
®
)