Changing The Programme; Cancelling The Programme - Siemens WM 1065 Operating And Installation Instructions

Changing the
programme
Cancelling the
programme
A pause in active
programme
If you have accidentally selected the wrong
programme:
Turn the programme selector to
Turn the programme selector to the desired
programme.
The Ready/Wash indicator light comes on.
Press the Start/Pause button.
The Ready/Wash indicator light comes on
and the new programme starts.
If you wish to prematurely end a programme:
Turn the programme selector to
Turn the programme selector to Spin .
The Ready/Wash indicator light comes on.
Press the Start/Pause button.
The Ready/Wash indicator light stops flashing,
,,
Spin/End indicator light is on.
If you want to add/remove the laundry during
active programme and the set programme
sequence will not be changed.
Press the Start/Pause button during the
working cycle, Start/Pause indicator flashes,
the programme is pause.
,,
1. Reday/Wash indicator is on: cannot add or
remove laundry, for your safety, in some period
of time the loading door cannot be opened.
,,
2. Reday/Wash indicator flashes: the laundry
can be added/removed. Wait about 2 minutes,
,,
Ready/Wash indicator light goes off, open the
door, add/remove the laundry, close the loading
door.
If required, press the Start/Pause button again,
the programme restarts, Start/Pause indicator
light is on and the washing machine continue
the interrupted programme.
,,
,,
,,
,,
,,
,,
,,
,,
,,
,,
Off .
,,
Off .
,,
19