Siemens WM 1065 Operating And Installation Instructions page 43

Transport
e.g. when moving
Preparing and inserting
the transport bolts
Before transporting the washing machine:
- Turn off the water tap,
- Drain any residual washing solution(refer to
Page 25),
- Release the water pressure in the supply hose
(refer to Page 26),
- Disconnect the washing machine from the mains,
- Dismantle the supply and drainage hose,
- Install the transport bolts.
Having transported the appliance and ensured
proper installation and connection, allow the
"Draining" program to run through before starting
the first wash program.
Remove the covers C.
Remove the back panel D (see Page 36),
preparing the transit bolt:
Insert and tighten the bolts.
41