Copying A Photograph; Using The Default Settings To Copy A Photograph - Kodak ESP C315 Extended User Manual

Copying

Copying a photograph

Using the default settings to copy a photograph

44
You can copy a photograph using the default settings, or you can adjust the quantity,
size, quality, and brightness of your copies.
The default settings are either the factory default settings (see
defaults, page 65), or defaults that you have set on the printer (see the bottom of
the table under Adjusting the settings and copying a photograph, page
To copy a photograph using the current default settings:
1. Load photo paper into the printer (see
2. Lift the scanner lid, and place the photograph face down in the right-front corner
of the scanner glass.
3. Close the lid.
4. Press Home.
5. Press to select Copy Photo.
6. Press Start to begin copying.
www.kodak.com/go/aiosupport
Resetting factory
Loading photo paper, page
45).
22).