Table of Contents
Advertisement
Copying
Copying a photograph
Using the default settings to copy a photograph
Adjusting the settings and copying a photograph
44
You can copy a photograph using the default settings, or you can make adjustments
to the quantity, size, quality, and brightness of your copies.
The default settings are either the factory default settings (see
defaults, page
76), or defaults that you have set on the printer (see
page
45).
To copy a photograph using the current default settings:
1. Place the original photograph face down on the scanner glass.
2. Press Home .
3. Press
to select Copy Photo .
4. Press Start Black to make a black-and-white copy, or press Start Color to make a
color copy.
To copy a photograph using settings other than the default settings:
1. Place the original photograph face down on the scanner glass.
2. Press Home .
3. Press
to select Copy Photo , then press OK .
4. Press
to select an option, then press
Copy Photo Option
Quantity
Tray Selection
www.kodak.com/go/aiosupport
or
Settings
Description
1 (default) to 99
The number of copies that print.
Top Tray (default)
Copy is made on the paper in the top
tray.
Bottom Tray
Copy is made on the paper in the
bottom tray.
Resetting factory
Save as Defaults,
to change the setting.
Advertisement
Table of Contents
