Copying a photograph
Using the default settings to copy a photograph
You can copy a photograph using the default settings, or you can adjust the quantity,
size, quality, and brightness of your copies.
The default settings are either the factory default settings (see
defaults, page
64), or defaults that you have set on the printer (see
page
45).
To copy a photograph using the current default settings:
1. Load photo paper into the printer (see
2. Lift the scanner lid, and place the photograph face down in the right-front corner
of the scanner glass.
3. Close the lid.
4. Press Home.
5. Press
to select Copy Photo.
6. Press Start to begin copying.
www.kodak.com/go/aiosupport
KODAK ESP C310 All-in-One Printer
Resetting factory
Loading photo paper, page
Save as Defaults,
22).
43