Table of Contents
Advertisement
Programming space cooling or quiet mode
5 sec
5 sec
EKHVH/X008BB6V3 + EKHVH/X008BB6+9WN
Daikin Altherma indoor unit
4PW64330-1 – 07.2010
Programming space cooling or quiet mode is carried out as follows:
1
2
3
4
5
6
7
8
5 sec
9
10 Press the < button for 5 seconds to store the programmed
Consulting programmed actions
5 sec
Consulting space heating or domestic water heating actions
Consulting space heating or domestic water heating is carried out as
follows.
1
2
3
4
5
Returning to previous steps in the programming procedure
without saving modified settings is done by pressing the
pr button.
Press the < button.
The actual mode is blinking.
Use the pi and pj buttons to select the mode you want
to program (quiet mode
s
or space cooling
The selected mode is blinking.
Press the < button to confirm the selected mode.
The first programmed action is displayed.
Use the pi and pj buttons to consult the programmed
actions.
This is called the readout mode. Empty program actions (e.g. 3
and 4) are not displayed.
Press the < button for 5 seconds to enter the programming
mode.
Use the < button to select the action number you would like to
program or to modify.
Use the pi and pj buttons to set the correct action time.
Use the ba button to select:
■ For space cooling:
-
x: switch cooling and the controller off.
-
9: set the temperature by means of the bi and
bj buttons.
a: to select automatic temperature calculation.
-
■ For quiet mode: use the ba button to select or deselect
x as action.
Repeat steps
6
to
8
to program the other actions of the selected
mode.
When all actions have been programmed, make sure that the
display shows the highest action number you would like to save.
actions.
If the < button is pressed when action number 3 is displayed,
actions 1, 2 and 3 are stored but 4 is deleted.
You automatically return to step 4. By pressing the pr button
several times, you return to previous steps in this procedure and
finally return to normal operation.
Returning to previous steps in this procedure is done by
pressing the pr button.
Press the < button.
The actual mode is blinking.
Use the pi and pj buttons to select the mode you want
to program (space heating
h
Press the < button to confirm the selected mode.
The actual day is blinking.
Select the day you would like to consult by means of the pi
and pj buttons.
The selected day is blinking.
Press the < button to confirm the selected day.
The first programmed action of the selected day appears.
c
).
or domestic water heating
w
)
Operation manual
10
Advertisement
Table of Contents
