Inserting The Battery/Charging - Panasonic RR-XS410 Owner's Manual

Ic recorder
Hide thumbs Also See for RR-XS410:
Table of Contents

Advertisement

Inserting the battery/Charging

Upon purchasing, charge once before initial use.
Use your computer for charging. If the battery has
completely run out, it takes approx. 2 hours for a full
recharge.
Inserting the rechargeable battery (included)
1 AAA rechargeable Ni-MH battery
Make sure the battery faces the
right direction.
1
5
Charging the battery
• Start the computer beforehand.
• Turn the unit off beforehand. (➜ page 9)
1
Take out the USB plug.
Push and slide
until a "click"
sound is heard.
3
2
4
Storing the USB plug:
2
Insert the unit's USB plug into the computer.
The fi rst time you connect the unit to your
PC
Because multiple "Found New Hardware" messages
will appear, do not disconnect the unit from your PC
until all messages disappear.
*
Never disconnect the unit or remove the SD card
while "ACCESS..." is displayed, otherwise this
unit may be damaged.
3
Slide the OPR/HOLD switch to the [HOLD]
side.
OPR/HOLD
switch
Insert the USB plug
straight in the same
direction as that of
the terminal.
Status indicator
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rr-xs400

Table of Contents