Recording - Panasonic RR-XS410 Owner's Manual

Recording

• Turn the power on. (➜ page 9)
• Press [g STOP/RETURN] to stop the unit.
1
Press [F2 (FOLDER)].
g STOP/RETURN
2
Press u, i
F1 F2
* REC
to select the
recording
destination folder
and press [q OK]
to enter.
For microphone recording, select a folder
among folders "A", "B", "C" and "D". (The
factory setting is "A")
When you select a folder except for "A", "B",
"C" or "D", recording is automatically saved
in "A".
LIST
* You can select preset recording settings registered in advance according to the recording target.
(➜ page 18)
* Change the recording mode or microphone sensitivity as necessary. (➜ pages 20, 21)
* If the file size exceeds 2 GB during recording, the recording stops tentatively at the point when the
data reaches 2 GB. Then, the recording resumes with a new file. Recording is not available during
the interval (approx. 2 seconds) from when the recording stops to when the recording resumes.
Note if your finger or an object touches this unit during recording, the noise will be recorded
*
through the microphone.
3
Press [* REC] (Recording starts).
STOP REC
The recording indicator
RETURN
lights on.
4
Press [g STOP/RETURN] to stop
recording.
To pause recording:
Press [* REC] during recording.
1
Recording indicator blinks.
Press [* REC] again to resume recording.
2
13