Mitsubishi Electric PAR-U01MEDU Smart ME Instruction Book page 11

▌
1 [ON/OFF] button
Touch to turn ON/OFF the indoor unit.
▌
2 [Operation mode] button
Touch to change the operation mode.
▌
3 [Hold/Cancel Hold] button
Touch to enable/disable the Hold function.
▌
4 [Menu] button
Touch to bring up the Menu screen.
▌
5 LED Indicator ON/OFF button
Touch to turn ON/OFF the LED indicator.
▌
6
Touch to decrease the set temperature.
▌
7
Touch to increase the set temperature.
▌
8
Touch to go to the Indoor unit setting screen.
▌
9 Room name
Room name appears here.
▌
0 Room temperature
Current room temperature appears here.
▌
a Humidity
Current room humidity appears here.
▌
b Set temperature
The set temperature appears here.
The display varies with the selected operation mode.
▌
c Day and time
Current day and time appear here.
▌
d
The icon and the word "Schedule" appear when the
scheduled operation is being performed.
The icon and the word "Hold" appear when the Hold
function is enabled.
The icon and the word "Timer" appear when the ON/
OFF timer is activated.
▌
e
Appears when the occupancy sensor senses an occupant.
▌
f
Appears when the brightness sensor detects light brighter
than a predetermined level.
▌
g
Appears during the energy-save control (depending on the
indoor unit model).
▌
h Filter sign
Appears when the filter needs maintenance.
▌
i Cool or Heat display
The current operation mode (Cool or Heat) appears when
Setback or Auto mode is selected.
▌
j
Appears when the built-in thermistor on the remote
controller is activated to monitor the room temperature.
appears when the thermistor on the indoor unit is
activated to monitor the room temperature.
▌
k
Appears when the operation is centrally controlled.
▌
l
Appears when the operation is locked.
▌
m Auto-OFF display
Appears when the Auto-OFF timer is activated.
▌
n
Indicates the interlocked LOSSNAY unit (ventilator) setting.
▌
o Remaining override time
The remaining override time appears when the set
temperature for the Setback mode has been overridden by
the controller.
The temperature setting returns to the previous setting after
the displayed time has elapsed.
▌
p [Cancel] button
Appears when the set temperature for the Setback mode
has been overridden by the controller.
Touching this button will return the set temperature to the
previous setting.
"Temp. range" appears when the settable temperature
range is restricted.
▌
q Set to
"Override" appears when the set temperature for the
Setback mode has been overridden.
▌
r
Touch to go to the General equipment screen.
Screen display
11