Sending Draw Points To Your Palm Os® Device; To Send Draw Points; Sending Waypoints To Your Palm Os® Device; To Send Waypoints - Apache Street Atlas USA 2005 User Manual

Street Atlas USA 2005 User Guide
1. Click the GPS tab, click Settings, and then click Exchange. The Exchange Wizard displays.
OR
Click the Map Files tab and then click Exchange. The Exchange Wizard displays.
2. Under Device Type, select Palm OS.
3. Select Send to Device.
4. Select Route Directions from the Object Type drop-down list.
5. Click Next.
6. Select the User Profile the route file will sync to from the User drop-down list.
7. Click Prepare for Sync.
8. Click Finish. The route directions are available on your handheld device after your next synchronization
operation.
Sending Draw Points to Your Palm OS® Device
Using the Exchange Wizard in Street Atlas USA

To Send Draw Points

Use the following steps to send draw points to your Palm OS device.
1. Click the GPS tab, click Settings, and then click Exchange. The Exchange Wizard displays.
OR
Click the Map Files tab and then click Exchange. The Exchange Wizard displays.
2. Under Device Type, select Palm OS.
3. Select Send to Device.
4. Select Draw Points from the Object Type drop-down list.
5. Click Next.
6. Click Prepare for Sync.
7. Click Finish. The draw points are available on your handheld device after your next synchronization
operation.
Sending Waypoints to Your Palm OS® Device
You can send waypoints to your Palm OS device using the Exchange Wizard in Street Atlas USA

To Send Waypoints

Use the following steps to send waypoints to your Palm OS device.
1. Click the GPS tab, click Settings, and then click Exchange. The Exchange Wizard displays.
OR
Click the Map Files tab and then click Exchange. The Exchange Wizard displays.
2. Under Device Type, select Palm OS.
3. Select Send to Device.
4. Select User Map Data - Waypoints from the Object Type drop-down list.
5. Click Next.
6. Click Prepare for Sync.
7. Click Finish. The waypoints are available on your handheld device after your next synchronization
operation.
Receiving a Route From Your Palm OS® Device
You can receive a route created on your Palm OS device using the Exchange Wizard. Once imported, the file can be
used in Street Atlas USA ®

To Receive a Route From Your Palm OS Device

Use the following steps to receive a route from your Palm OS device.
1. Click the GPS tab, click Settings, and then click Exchange. The Exchange Wizard displays.
OR
Click the Map Files tab and then click Exchange. The Exchange Wizard displays.
2. Under Device Type, select Palm OS.
62
® 2005, you can send draw points to your Palm OS device.
2005.
® 2005.