Copying Your Map To The Clipboard; Manually Assembling A Multipage Map; To Manually Assemble A Multipage Map - Apache Street Atlas USA 2005 User Manual

Street Atlas USA 2005 User Guide
d. Optional: If you want to use other tabs and functions but not lose your current print area, print
photo zoom, or other settings, select the Lock Print Center check box. Selecting this check box
locks the print area and changes the tab label to red.
e. Optional: Select the Print Preview check box to zoom the map and view the entire print area.
Clear the check box to return to your previous data zoom level.
6. Optional: If you are printing a single-page map, you can add a title to your map by selecting the Map Title
check box and clicking Map Title to assign the title's text, font, and alignment.
7. Click the save button
Note: To cancel saving the file and return to the Print Map dialog area, click Cancel.
8. Type the desired file name in the File Name text box, select to save the file as a .bmp or .jpg from the Save
as Type drop-down list, assign a DPI (dots per inch) value (optional), and click Save. The map is saved.

Copying Your Map to the Clipboard

Click the copy to clipboard button
program such as Microsoft

Manually Assembling a Multipage Map

After you have printed the sheets for your multipage map, you are ready to assemble the map.
Before you begin, be sure you have a clear work surface large enough to accommodate the final map size.
You will need the following tools to assemble your map:
•
Pencil
•
Razor knife
•
Straight Edge Ruler (longer than the edge of the longest sheet)
•
Permanent Tape ("invisible" or "magic" type)
•
Removable Tape
For convenience, you can use the DeLorme MapPack to display and store your map pages. The
MapPack holder is available separately from DeLorme.

To Manually Assemble a Multipage Map

Use the following steps to manually assemble a multipage map.
1. Using the straight edge ruler and razor knife, trim each sheet to the thin black line bordering the map.
Note: For adjacent sheets, trim only one page. This makes piecing the sheets together easier.
2. For each sheet that needs to be trimmed, mark the edges of the sheet to indicate the areas that need to be
trimmed.
The following diagrams of a 2 x 2 and 3 x 3 multipage map provide additional information on where to
trim the sheets. The arrows indicate the edges to be trimmed.
52
. The Save 2D Map Image dialog box displays.
to copy your map to the clipboard so that you can paste it into a graphics
® Paint or Adobe ® Photoshop.