To Send Route Directions; Sending Draw Data To Your Gps Device; To Send Draw Data To Your Gps Device; Sending Waypoints To Your Gps Device - Apache Street Atlas USA 2005 User Manual

To Send Route Directions

Use the following steps to send route directions to your GPS device.
1. Connect your GPS receiver to your computer.
2. If you are using a third-party GPS receiver, you may have to use specific settings. For example, if you are
using a GARMIN GPS receiver, set your GARMIN receiver interface to GRMN/GRMN. For more
information, see your owner manual or GPS Settings for Third-Party Devices on page 92.
3. Click the GPS tab, click Settings, and then click Exchange. The Exchange Wizard displays.
OR
Click the Map Files tab and then click Exchange. The Exchange Wizard displays.
4. Under Device Type, select GPS.
5. Select Send to Device.
6. Select Route Directions from the Object drop-down list.
7. Click Next.
8. Designate a route name and/or a route number for the file on the device (device dependent).
9. To avoid overwriting existing waypoints on your device, type a starting point for the new points and select
the Prefix a Number to the Waypoint Name check box.
Note: Not all devices support starting points. See your device manual for more information.
10. Click Send to Device.
11. Repeat steps 8–10 for each route file you wan to send to your device.
12. Click Finish.

Sending Draw Data to Your GPS Device

If you have a compatible GPS device, you can send draw data to your GPS device using the Exchange Wizard in
Street Atlas USA 2005.

To Send Draw Data to Your GPS Device

Use the following steps to send draw data to your GPS device.
1. Connect your GPS receiver to your computer.
2. If you are using a third-party GPS receiver, you may have to use specific settings. For example, if you are
using a GARMIN GPS receiver, set your GARMIN receiver interface to GRMN/GRMN. For more
information, see your owner manual or GPS Settings for Third-Party Devices on page 92.
3. Click the GPS tab, click Settings, and then click Exchange. The Exchange Wizard displays.
OR
Click the Map Files tab and then click Exchange. The Exchange Wizard displays.
4. Under Device Type, select GPS.
5. Select Send to Device.
6. Select Draw Data from the Object drop-down list.
7. Click Next.
8. To avoid overwriting existing waypoints on your device, type a starting point for the new points and select
the Prefix a Number to the Waypoint Name check box.
Note: Not all devices support starting points. See your device manual for more information.
9. Click Send to Device.
10. Repeat steps 8–9 for every route file you want to send to your device.
11. Click Finish.

Sending Waypoints to Your GPS Device

If you have a compatible GPS device, you can send waypoints to your GPS device using the Exchange Wizard in
Street Atlas USA 2005.

To Send Waypoints

Use the following steps to send waypoints to your GPS device.
1. Connect your GPS receiver to your computer.
2. If you are using a third-party GPS receiver, you may have to use specific settings. For example, if you are
using a GARMIN GPS receiver, set your GARMIN receiver interface to GRMN/GRMN. For more
information, see your owner manual or GPS Settings for Third-Party Devices on page 92.
GPS
99