Sending Tracks To Your Gps Device; To Send Tracks; Receiving A Route From Your Gps Device; To Receive A Route - Apache Street Atlas USA 2005 User Manual

Street Atlas USA 2005 User Guide
3. Click the GPS tab, click Settings, and then click Exchange. The Exchange Wizard displays.
OR
Click the Map Files tab and then click Exchange. The Exchange Wizard displays.
4. Under Device Type, select GPS.
5. Select Send to Device.
6. Select User Map Data - Waypoints from the Object drop-down list.
7. Click Next.
8. To avoid overwriting existing waypoints on your device, type a starting point for the new points and select
the Prefix a Number to the Waypoint Name check box.
Note: Not all devices support starting points. See your device manual for more information.
9. Click Send to Device.
10. Repeat steps 8–9 for every route file you want to send to your device.
11. Click Finish.

Sending Tracks to Your GPS Device

If you have a compatible GPS device, you can send tracks to your GPS device using the Exchange Wizard in Street
Atlas USA 2005.

To Send Tracks

Use the following steps to send tracks to your GPS device.
1. Connect your GPS receiver to your computer.
2. If you are using a third-party GPS receiver, you may have to use specific settings. For example, if you are
using a GARMIN GPS receiver, set your GARMIN receiver interface to GRMN/GRMN. For more
information, see your owner manual or GPS Settings for Third-Party Devices on page 92.
3. Click the GPS tab, click Settings, and then click Exchange. The Exchange Wizard displays.
OR
Click the Map Data tab and then click Exchange. The Exchange Wizard displays.
4. Under Device Type, select GPS.
5. Select Send to Device.
6. Select User Map Data - Track from the Object drop-down list.
7. Click Next.
8. Designate a track name or a track number for the file on the device (optional).
9. Click Send to Device.
10. Repeat steps 8–9 for every route file you want to send to your device.
11. Click Finish.

Receiving a Route From Your GPS Device

If you have a compatible GPS device, you can receive a route created on your GPS device using the Exchange
Wizard. Once imported, the file can be used in Street Atlas USA 2005.

To Receive a Route

Use the following steps to receive a route from your GPS device.
1. Connect your GPS receiver to your computer.
2. If you are using a third-party GPS receiver, you may have to use specific settings. For example, if you are
using a GARMIN GPS receiver, set your GARMIN receiver interface to GRMN/GRMN. For more
information, see your owner manual or GPS Settings for Third-Party Devices on page 92.
3. Click the GPS tab, click Settings, and then click Exchange. The Exchange Wizard displays.
OR
Click the Map Files tab and then click Exchange. The Exchange Wizard displays.
4. Under Device Type, select GPS.
5. Select Receive from Device.
6. Select Route from the Object drop-down list.
7. Select Route from the Save As drop-down list.
8. Click Next.
9. Select the route name or route number on the device that you want to receive.
100