Fresh Food Features; Interior Shelves - Amana 24 Cu. Ft. Service Manual

What if These Features
are Different from Mine?

Interior Shelves

To avoid personal injury or property damage, observe the following:
• Confirm shelf is secure before placing items on shelf.
• Handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden
temperature change.
Side Glide™ Shelves (some models)
Side Glide™ shelves hook onto a rear
double-crossbar assembly. Shelves may be aligned side
by side to create a full width level surface,
or if attached to separate crossbars, the
shelves may slide left or right to
accommodate storage needs.
To remove and install shelf:
• To remove shelf, raise shelf
10° to unhook from double crossbar and lift out.
• To install, reverse above procedure.
To slide shelves:
• Lift front of shelf slightly
and slide left or right.
To remove and install
double-crossbar assembly:
• To remove, slide assembly
up to unhook from metal
track.
• To install, reverse above procedure.
RS1300005 Rev. 0
This book is intended to show the variety of features that are available in the product
line. If your refrigerator does not have all the options that are shown, many of these
options may be purchased by contacting the Consumer Affairs Department. See contact
information on the cover of your manual.
!
CAUTION
10
A-

Fresh Food Features

Spillsaver™ Easy Glide™
(some models)
Spillsaver™ Easy Glide™
shelves feature the convenience
of easy cleaning with a pull-out
design to reach items in the
back. For ease of cleaning,
glass shelf may be removed by pulling to full
extension and lifting out of frame.
• To remove shelf and frame, see instructions for
Spillsaver™ stationary shelves.
Spillsaver™
Spillsaver™ stationary shelves
hold simple spills for easier
cleaning.
• To remove shelves, lift up and out.
• To install shelves, reverse above
procedure.
Rear Shelf Extensions
(some models)
Rear shelf extensions help prevent articles from falling
off the back of the shelf.
To remove and install shelf extension:
• To remove, pull extension
straight up from rear of shelf.
• To install, insert posts of the
shelf extension into holes in the
shelf frame.