Configuration - TANDBERG Gatekeeper User Manual

TANDBERG Gatekeeper User Manual
14.1.13 SystemUnit
xstatus SystemUnit
Reports information about the system as follows:
Product name
Uptime
SystemTime
TimeZone
LocalTime
Software version
Software name
Software Build
Release date
Number of calls supported
Number of registered endpoints and services supported
Hardware serial number
Hardware version
14.1.14 Zones
xstatus Zones
Reports the call and bandwidth information for all zones on the system. Also shows status of the
zone as a whole and the status of each gatekeeper in the zone.
14.2 Configuration
The configuration root command, xconfiguration, is used to set configuration settings.
To list all xconfiguration commands type:
xconfiguration ?
To list all configuration data, type:
xconfiguration
To show a specific configuration value, type:
xconfiguration name
To show usage information for a specific configuration value, type:
xconfiguration name ?
To set a configuration element type:
xconfiguration name param1: value1 param2: value2
NOTE Remember to use the colon after naming the parameters.
56