TANDBERG Gatekeeper User Manual page 75

TANDBERG Gatekeeper User Manual
14.2.14 Session
xconfiguration Session TimeOut:
Controls how long an adminstration session (HTTPS, Telnet or SSH) may be inactive before the
session is timed out. A value of 0 turns session time outs off. The default is 0. You must restart
the system for changes to take effect.
14.2.15 SNMP
xconfiguration SNMP CommunityName:
SNMP Community names are used to authenticate SNMP requests. SNMP requests must have
this 'password' in order to receive a response from the SNMP agent in the Gatekeeper. You must
restart the system for changes to take effect.
xconfiguration SNMP Mode:
Turn on/off SNMP support. You must restart the system for changes to take effect.
xconfiguration SNMP SystemContact:
Used to identify the system contact via SNMP tools such as TANDBERG Management Suite or
HPOpenView. You must restart the system for changes to take effect.
xconfiguration SNMP SystemLocation:
Used to identify the system location via SNMP tools such as TANDBERG Management Suite or
HPOpenView. You must restart the system for changes to take effect.
14.2.16 SSH
xconfiguration SSH Mode:
Enables/disables SSH and SCP support. You must restart the system for changes to take effect.
14.2.17 Subzones
xconfiguration SubZones DefaultSubZone Bandwidth PerCall Limit:
Per call bandwidth of the default subzone.
xconfiguration SubZones DefaultSubZone Bandwidth PerCall Mode:
Whether or not the default subzone is enforcing total bandwidth restrictions. None corresponds to
no bandwidth available.
xconfiguration SubZones DefaultSubZone Bandwidth Total Limit:
Total bandwidth available on the default subzone.
64
<0..65534>
<name>
<On/Off>
<name>
<name>
<On/Off>
<1..100000000>
<None/Limited/Unlimited>
<1..100000000>