GE MapSight User Manual page 20

Allow the MapSight unit to fully power up past any start up screens and
return to the MapSight home screen.
If you have purchased/received any additional/spare batteries with your MapSight unit/kit, please
repeat the above process to ensure that the correct capacity levels are set.
Suspend the MapSight unit by pressing once on the Power button. This
should cause the LCD screen to dim.
WARNING!
Changing batteries should only be performed when
the unit is suspended or disconnected from external power.
Similar to the Turning your MapSight on for the first time instructions, replace the battery by:
releasing the lock,
•
• remove the battery cover
remove the existing battery
•
fit the new uncharged battery
•
replace and relock the battery cover.
•
Un-suspend the MapSight unit by pressing once on the Power button.
This should cause the LCD screen to return to the last screen.
Fully charge the new battery using the previous steps to monitor the charge status until fully charged.
MapSight U ser M anual
MS-101-14-12-34.0
Page 1 6 www.gemapsight.com/support