Dimming Or Turning Off The Backlight; Adjusting The Backlight Timer - GE MapSight User Manual

Dimming or turning off the backlight

Dimming or turning off the display backlight saves battery power when the device is running
on a battery pack. To dim or turn off the backlight, follow these steps:
1. Tap Start > Settings > System tab > Brightness.
2. Select the Battery Power tab if it is not already selected. The Brightness window for battery
power appears, shown here.
Drag the backlight slider slightly to the left to dim the
backlight. Drag the slider all the way to the left to turn
the backlight off.

Adjusting the backlight timer

By default, the display and keypad backlights are set to turn off after one minute of inactivity.
To adjust the time when your backlight turns off, follow these steps:
Tap Start > Settings > System tab > Backlight. The
Backlight window appears. To change the timer for
external power, tap the External Power tab.
1. Select or deselect the two options.
2. If you selected the first checkbox, choose the length
of time before the backlight turns off
MapSight U ser M anual
MS-101-14-12-34.0
Page 1 15 www.gemapsight.com/support