Flag A Feature - GE MapSight User Manual

Flag a Feature

This function allows a user to flag a feature that has been captured for review at a later stage. On
pressing the flag button the text changes to red (see below) to indicate that the feature has been
flagged.
On the main menu, the feature will also be highlighted in red after it has been flagged. Tapping the
flag button again 'unflags' the feature.
A typical real world scenario: if for some reason you cannot or choose not to complete capturing
information for a pole, you can flag this pole as incomplete and move onto the next one. When
reviewing your work via the home screen at a later point, you will see that one pole still requires more
work and then resume capturing that information.
MapSight U ser M anual Page 1 40 www.gemapsight.com/support
MS-101-14-12-34.0