Copying Data From A Peripheral Device - GE MapSight User Manual

Copying data from a peripheral device

You can copy data from an SD card, or USB flash drive onto your MapSight by following these
steps:
On your MapSight, tap Start > Programs > File Explorer.
Tap and hold the file you want to copy to your MapSight. A pop-up menu appears, as
shown here.
Note: If you want to copy multiple files, tap and drag the stylus over the files. Once
the files are selected, tap and hold the stylus on the files until a pop-up menu
appears.
Select Copy from the pop-up menu
Open the destination folder where you want to place
your file. (To copy the file to the device drive, select My
device.)
Tap and hold the stylus on the white space below the
list of existing files until a pop-up menu appears.
Select Paste. The copied file appears in the folder.
MapSight U ser M anual
MS-101-14-12-34.0
Page 1 22 www.gemapsight.com/support