Iscsi Configuration; Intel(R) Ethernet Connection I354 - Asus P9A-I Series User Manual

4.4.12

iSCSI Configuration

This allows you to configure the iSCSI Initiator settings.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
iSCSI Initiator Name
Add an Attempt
Delete Attempts
Change Attempt Order
4.4.13

Intel(R) Ethernet Connection I354

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
PORT CONFIGURATION MENU
NIC Configuration
Blink LEDs
PORT CONFIGURATION INFORMATION
UEFI Driver:
Adapter PBA:
Chip Type
PCI Device ID
Bus:Device:Function
Link Status
MAC Address
Virtual MAC Address
NIC Configuration
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Link Speed
Wake On LAN
Link Speed [Auto Negotiated]
Specifies the port speed used for the selected boot protocol. Configuration options: [Auto
Negotiated] [10 Mbps Half] [10 Mbps Full] [100 Mbps Half] [100 Mbps Full]
Wake On LAN [Enabled]
Enables or disables the system to be powered on using an onboard magic packet.
Configuration options: [Disabled] [Enabled]
Blink LEDs [0]
Allows you to identify the physical network port by flashing its LED.
4-26
0
Intel(R) PRO/1000 5.8.09
001800-000
Intel i350
1F41
00:14:00
[Disconnected]
40:16:7E:7F:D8:07
40:16:7E:7F:D8:07
[Auto Negotiated]
[Enabled]
The worldwide unique name
of iSCSI Initiator. Only
IQN format is accepted.
Enables Legacy USB
support. AUTO option
disables legacy
support if no USB
devices are connected.
DISABLE option will
keep USB devices
available only for
EFI applications.
Specifies the port
speed used for
the selected boot
protocol.
Chapter 4: BIOS setup