Table of Contents
Advertisement
2. Click the ZOOM buttons to adjust the lens zoom.
WIDE: Optically brings an object closer.
TELE: Optically brings an object further.
3. Click the [FOCUS] buttons to adjust the lens focus.
FAR: Sets the lens focus for further object.
NEAR: Sets the lens focus for closer object.
AUTO: Automatically set the lens focus.
4. Click the [IRIS] buttons to adjust the lens iris.
CLOSE: Closes the lens iris.
OPEN: Opens the lens iris.
RESET: Resets the lens iris to the factory default
setting.
5. Click the [AUTO PANI] buttons to control the auto
panning function.
ON: Activates auto panning function.
OFF: Deactivates auto panning function.
6. Clicking anywhere on the live image moves the camera
(optional) up and down, or to the right and left.
• The camera pan/tilt angle increases (or decreases) as
the point clicked moves further (or closer) to the image
center.
• To move the camera continuously, click the image
repeatedly.
You cannot pan or tilt the camera continuously by
dragging on the image.
7. Select a preset position number (1 - 64) to be displayed
by clicking the pulldown list, then click the [SET]
button.
8. To return to the previous MAIN CONTROL PANEL, click
the [MAIN MENU] button on the panel.
46
Advertisement
Table of Contents
