Table of Contents
Advertisement
WJ-HD500 SETUP
When the WJ-HDB502 Network Board is installed in the WJ-
HD500 Disk Recorder, it is enabled setup the WJ-HD500
SETUP menu from the PC in the network
On the MAIN CONTROL PANEL window, clicking the
[HDB500 MENU] button will display the user ID and pass-
word dialog box.
Enter your user ID and password in the dialog box.
The WJ-HD500 SETUP MENU window shown in the figure
will appear on the display.
Note: When the access is made from the PC that is previ-
ously registered host with the host authorization, the
WJ-HD500 SETUP MENU window will automatically
appear on the display.
If the registration is not completed yet, enter the default
user name and password as shown below.
User Name: admin
Password:
nil (not required)
Programming Setup Window
As shown in the figure, the WJ-HD500 SETUP MENU win-
dow has eight main submenus. Seven of these are further
divided into additional submenus.
The display underlined indicates that the item has a sub-
menu for more detailed setups.
14
Timer Setting
The timer recording mode is triggered by the internal or an
external timer.
This item lets you enable or disable the timer for recording.
Select a parameter to be activated by clicking the pulldown
list.
INT: Selects the internal timer for recording as sched-
uled in the programmed menu.
EXT: Selects the external timer for recording when
detecting power on and off.
OFF: Timer recording is disabled.
To record manually, set to this mode.
The factory default setting is OFF.
Note: When the parameter is set to something other
than OFF, the Disk Recorder does not start record-
ing even if the REC button is pressed.
Advertisement
Table of Contents
