Problem Chart; Cleaning And Maintenance - Omnitronic CMP-102 User Manual

7. PROBLEM CHART

This CD player cannot be compared to conventional hi-fi players–even if they have almost the same
appearance. This player is much more rugged in order to withstand the strenous road use and consistent
transports of mobile discotheques.
Vibrations caused by of powerful low frequencies may lead to skipping of the CD. This CD player is provided
with a 40-second anti-shock memory and rubber feet to compensate shocks or vibrations.
Should you have further problems, please refer to the chart below.
The adjustments of the pitch control change the FM frequencies. Should the display repeatedly show "ERR"
adjust the frequencies.
1. Have the connections correctly been carried out?
2. Is your amplifier and your mixer properly adjusted?
3. Have you kept to all instructions given in this manual?
PROBLEM
Player does not react
switching on
Player does not start operation
No sound
Does not read properly
Does not read the program
Pop noise

8. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
POSSIBLE CAUSE
when Connection to mains disrupted.
CD is inproperly loaded or dirty
Check the mixer and amplifier
connections
Player is exposed to vibrations
Player is in normal playback mode
Inapropriate mixer
connections
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Check AC plug and AC connection
Reload
upwards or clean CD with dry and
soft cloth
Possibly exchange connections
Place player on a more stable
stand, rack etc
Switch
reprogram
or amplifier Check cable and jack quality
29/30
REMEDY
CD with the lettering
to pause mode
00052162.DOC, Version 1.0
and