Starting Playback/Pause; Fast Forward Or Reverse; Return To The Starting Point Of The Title Or To A Defined Spot (Cueing); Detecting The Bpm - Omnitronic XMT-1400 User Manual

6.7 Starting playback/pause

1. Press the button
point of the title will automatically be stored in the memory as the cue point. The unit will return to this
cue point by shortly pressing the button CUE.
2. Playback can be interrupted at any time with the button
indicates . To continue, press the button
interrupts the playing and returns the title to the cue point.

6.8 Fast forward or reverse

1. For fast forward or reverse with the jogdial, first activate the search function with the button JOG MODE.
Press the button until the LED next to it lights up red. Then turn the jog dial in the corresponding
direction. The fast forward/reverse speed depends on the turning speed of the jogdial.
• In pause or cue mode the current spot is constantly repeated after fast forward or reverse until playback
is started with the button
• The fast forward and reverse function is only possible within a title.
2. Alternatively to the jog dial you can also use the buttons SEARCH
button pressed, for fast reverse the button

6.9 Return to the starting point of the title or to a defined spot (cueing)

To quickly jump back to the starting point of the title or to a defined spot, a starting point (cue point) can be
stored temporarily for the button CUE. The cue point will be overwritten with the starting point of the next title
when the next title is reached or when the next title is selected.
1. To jump to the starting point of a title, press the button CUE in pause or play mode. The unit stops and
returns to the starting point of the title (cue point) and is in pause mode. The button CUE lights red and
the display indicates CUE
2. After jumping to the cue point, playback can be started with the button
the button CUE pressed and momentarily play the title. The display indicates
the button the unit instantly returns to the cue point and is in pause mode.
3. To set the cue point at a different spot of the title, interrupt the playback with the button
the playback is restarted with the button
repeatedly).
4. To set the cue point precisely to 1 frame (1/75 second) set the unit to pause and use the jog dial to go to
the exact spot (not possible while in scratch mode). The current spot is constantly repeated. As soon as
playback is started with the button

6.10 Detecting the BPM

The number of beats per minute (BPM) of a title can be determined manually. Tap the button BPM-TAP
several times to the beat of the music until the display indicates the number of beats.

6.11 Pitch adjustment

The playback speed can be adjusted variably up to ±16 % with the pitch slide control.
1. The adjusting range for the speed is preset to ±4 %. Each push of the PITCH button switches between
±6 %, ±12 %, ±16 % and back to ±4 %.
2. Then slide up the pitch control to decrease the pitch and slide it down to increase it. The display shows
the percentage deviation from the standard speed. The number of beats changes accordingly.
The control locks into place in mid-position. In this position a title is played at standard speed.
, to start playback. The button lights blue and the display indicates
.
.
a new cue point is memorized (button CUE flashes repeatedly).
. The button starts flashing and the display
once again. Pressing the button CUE during playback also
.
, a new cue point is memorized (button CUE flashes
29/32
. The starting
and . For fast forward, keep the
. Alternatively, you can keep
As soon as you release
.
. As soon as
00058520.DOC, Version 1.0