Void Infinite 7 V2 Owner's Manual page 2

Infinite V2
TO PREVENT ELECTRIC SHOCK, DO NOT
REMOVE TOP OR
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. DISCONNECT
POWER CORD BEFORE REMOVING
REAR PANEL COVER TO ACCESS GAIN
SWITCH.
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE!
CAUTION: Do not locate sensitive high-gain equipment such as preamplifiers or tape decks
directly above or below this unit. Because this amplifier has a high power density, it has a
strong magnetic field which can induce hum into unshielded devices that are located nearby.
This field is strongest just above and below the unit. If an equipment rack is used, we
recommend locating the amplifier(s) at the bottom of the rack and the preamplifier or other
sensitive equipment at the top.
The lightning bolt triangle is
used alert the user to the risk
of electric shock
Page 2
IMPORTANT
THE PRODUCT REQUIRES
CLASS 2 OUTPUT WIRING.
BOTTOM COVERS.
WARNING
Magnetic Field
The exclamation point triangle is used
to alert the user to important operating
and/or maintenance instructions.
Shock Hazard - Do Not Enter
Choc Hasard - N*entrent
Schocke Hazard - Test Nicht
Betrete
Urto Hazard - Do Non Entrano
Printed on
recycled paper.
Reference Manual