Table of Contents
Advertisement
PC Camera Driver Installation
1. Make sure the module is powered on (click Cancel if you see a " New Hard-
ware Found " message ) , and then insert the Device Drivers & Utilities +
User's Manual CD-ROM into the CD/DVD drive.
2. Click 11.Install Camera Driver > Yes.
OR
Click Start (menu) > Run... and navigate (Browse...) to
X:\Drivers\Camera\Driver\Setup.exe and click OK.
3. Choose the language you prefer, and click OK.
4. Click Next > Finish to restart the computer.
5. Run the BisonCap application program from the BisonCam shortcut on the
desktop or from the BisonCam item in the Start > Programs/All Programs
menu (if the hardware is turned off use the Fn + F10 key combination to
turn it on again).
6. You can use the application button
you have installed the hot key driver (see
7. A Snapshot folder will be placed on the desktop to record still pictures
taken with using the application button
tons" on page D -
46).
to run the BisonCap application if
"Hot Key Utility" on page 4 -
(see
"PC Camera Hot Key But-
Windows XP Information
Stand by/Hibernate
or Shutdown Error
The computer may stop
responding when you
put it into (or resume
from) Stand By or Hiber-
nate, or when you shut
down.
This error is caused by
power
management
within
Windows
when applied to a PC
Camera attached to the
internal USB hub.
7).
Microsoft has posted a
Hotfix for this error on its
website (search for Hot-
fix KB909667).
Download and install the
Hotfix to correct this er-
ror.
PC Camera Module D - 41
XP,
D
Advertisement
Table of Contents
