Pc Camera Driver Installation - California Access M665S User Manual

Modules & Options
7
7 - 10 PC Camera Module

PC Camera Driver Installation

1. Make sure the module is powered on (click Cancel if you see a " New
Hardware Found " message ) , and then insert the Device Drivers & Utilities
+ User's Manual CD-ROM into the CD/DVD drive.
2. Click 10.Install Camera Driver > Yes.
3. Choose the language you prefer and click Next.
4. Click Next > Install.
5. Click Finish to restart the computer.
6. Run the BisonCap application program from the BisonCam shortcut on the
desktop, or from the BisonCam item in the Start > Programs/All Pro-
grams menu (if the hardware is turned off use the Fn + F10 key combina-
tion to turn it on again).
7. You can use the application button
you have installed the hot key driver (see
8. A Snapshot folder will be placed on the desktop to record still pictures
taken with using the application button
tons" on page 7 - 18).
to run the BisonCap application if
"Hot Key Utility" on page 4 -
(see "PC Camera Hot Key But-
7).