Table of Contents
Advertisement
Windows XP Information
S3Tray Plus Utility
You can also use the
S3Tray Plus utility in
the taskbar to config-
ure an external dis-
play.
Attach the external dis-
play (CRT) to the ex-
ternal monitor port.
Right-click the
icon in the taskbar and
select S3Display.
Select the CRT (it
should have a tick
alongside it) and click
Yes to confirm the set-
tings.
Figure D - 10
D
S 3Display
D - 14 Display Devices (VIA)
Display Devices (VIA)
Besides the built-in LCD, you can also use an external monitor (CRT)/flat panel dis-
play as your display device. Connect it to the external monitor port on the right of the
computer. See the instructions below:
1. Attach the external display to the external monitor port and turn it on.
2. Click Advanced in the Display Properties control panel (see
page D -
10) to display the additional tabs.
3. Select S 3Display (tab).
4. Click to put a tick in the tickbox under the CRT icon.
5. Click Apply > OK and allow the monitor time to refresh the display.
6. Click Yes to confirm the settings.
"Video Features" on
Advertisement
Table of Contents
