Table of Contents
Advertisement
Recording Audio
The
audio record hot key button allows you to record audio from either the built-in microphone, or from a
microphone connected to the microphone-in jack. To record on the computer, setup the audio recording options
in Windows as follows (see
1.
Go to the Start menu and point to Settings (or just click Control Panel) and click Control Panel, then double-
click the Sounds & Audio Devices icon (Sounds, Speech, and Audio Devices in Category View).
2.
Click Advanced in the Volume > Device volume tab.
3.
Click Options and scroll down and click Properties.
4.
Select HD Audio rear input (for a microphone plugged in to the microphone-in jack)/HD Audio Front Mic (for
the built-in microphone) from the Mixer device menu and click OK (make sure there is a tick in the Microphone
tick box).
5.
Click Recording (button) and click OK.
6.
Boost the volume in the Microphone section as high as it will go (make sure there is a tick in the Select tick box
if you have selected HD Audio rear input).
7.
Close the open windows.
8.
You can also boost the microphone from the Mixer in the VIA Audio Deck
9.
Press the audio record button
the screen).
10. Press the
audio record button again to stop the recording process (the record icon will disappear from the
top left of the screen).
11. The recorded audio file (in .wav format) will appear in the Shared Documents > Wav folder in My Computer.
12. Double-click the file to playback the recorded audio.
Figure D - 5 on page D -
to begin the recording process (the record icon
8).
Windows XP Information
menu (see page
D -
9).
will flash in the top left of
Recording Audio D - 7
D
Advertisement
Table of Contents
