Table of Contents
Advertisement
Problem
You
are
experiencing
screen flicker problems
(in
Windows
Vista
ONLY) when using an
older CRT (Non DDC) as
your external display
You
forget
the
boot
password.
If you choose to set a boot password, NEVER forget your password. The consequences of this could be serious. If you cannot
remember your boot password you must contact your vendor and you may lose all of the information on your hard disk.
The sound cannot be
heard or the volume is
very low.
The
audio
recording
cannot be heard or the
volume is very low.
You will need to update the video driver to support older CRTs. See
(for Win Vista Only)" on page B - 8
If you forget the password, you may have to discharge the battery of the CMOS. Contact your
service representative for help.
Password Warning
The volume might be set too low. Check the volume control in the Volume Control Panel in the
Windows taskbar, or use the key combination Fn + F5 and F6 (see
on page 2 -
9) to adjust.
The recording volume might be set too low. Check the information in
page 2 - 11/"Recording Audio" on page D -
Possible Cause - Solution
for instructions on installing the video driver.
7.
Problems and Possible Solutions 8 - 9
Troubleshooting
"Non DDC CRT Monitors
"Function Keys/Hot Keys"
"Recording Audio" on
8
Advertisement
Table of Contents
