Computer Stops Operating During Scanning - Canon LiDE 220 Online Manual

Computer Stops Operating during Scanning

Restart the computer, reduce the output resolution in ScanGear (scanner
Check 1
driver) and scan again.
Refer to "Output Settings" for your model from Home of the Online Manual for details.
Delete unnecessary files to obtain sufficient free hard disk space, then scan
Check 2
again.
Error message may appear if there is not enough hard disk space to scan and save, when the image size is too
large (such as when scanning a large item at high resolution).
In Folder to Save Temporary Files of IJ Scan Utility, specify a folder on a
Check 3
drive with sufficient free space.
Settings (General Settings) Dialog Box
Multiple devices may be connected to USB ports.
Check 4
Disconnect devices other than your scanner.
244