Canon LiDE 220 Online Manual page 108

• Items printed on thin white paper
• Long narrow items such as panoramic photos
• Reflective disc labels may not be scanned as expected.
• Place items correctly according to the type of item to be scanned. Otherwise, items may not be
scanned correctly.
Refer to "Placing Items (When Scanning from a
Note
• To reduce moire, set Select Source to Magazine.
Color Mode
Select the color mode in which to scan the item.
Paper Size
Select the size of the item to be scanned.
When you select Custom, a screen in which you can specify the paper size appears. Select a Unit,
then enter the Width and Height, and then click OK.
Note
• Only Auto is available when Select Source is Auto.
• Click Defaults in the screen in which you can specify the paper size to restore the specified
settings to the default settings.
Resolution
Select the resolution of the item to be scanned.
The higher the resolution (value), the more detail in your image.
Resolution
Note
• Only Auto is available when Select Source is Auto.
Scale
Select a scale according to the paper to print on and purpose of use.
Select Fit to Paper to resize the scanned image automatically to fit the paper to print on. Since the
image's aspect ratio is maintained, margins may appear at the top and bottom or on the left and right
depending on the size of the item and paper.
Select Custom to enter a value in Scale Setting. Enter a percentage (25 % to 400 %) and click OK.
Note
• Scanned images are printed on paper of the size specified on your printer.
Computer)" for how to place items.
108