GLOBAL ASSISTIVE DEVICES VibraLITE 8 User Manual page 6

Push LAP/RESET Button to rotate through Alarms until you reach the Alarm
that you want to change.
Push & Hold the LAP/RESET Button. HOLD TO SET will show on the
display. Hold until hours flash.
Continue as above to set hours and minutes by advancing numbers with the
START/STOP Button and changing from Hours to Minutes with the MODE
Button.
Push LAP/RESET Button when you have entered the change.
TO TURN OFF/ON ALARM(S)
(Example: OFF for wake up calls on weekends, days off)
Push MODE Button to rotate to ALARM MODE.
Original alarm time will show on display.
Note: When Alarm is ON, Alarm time shows on display.
When Alarm is turned off, OFF will show on display.
CHRONO/STOPWATCH
The stopwatch can count up to 23 hours, 59 minutes and
59.99 seconds.
Push the MODE Button to rotate to the CHRONO MODE.
Wait 3 seconds.
The Icon located at the top left of the display under the C will
flash.
ALARM 1 will show the alarm set time. Push LAP/RESET
Button to rotate to the number of the Alarm that you want
to turn off.
Push START/STOP Button. ALARM will show OFF on
display.
To turn alarm on push START/STOP Button again.
CHRONO 00'00"00 will then show on the display.
Push the START/STOP Button to start the counting up.
Vibra LITE 8 is a trademark of GLOBAL ASSISTIVE DEVICES, INC. Page 6