GLOBAL ASSISTIVE DEVICES VibraLITE 8 User Manual page 8

Push MODE Button. Minutes will flash.
Push START/STOP Button to rotate to desired minutes of time wanted.
Push MODE Button. Seconds will flash.
Push START/STOP Button to rotate to desired seconds of time wanted.
While Digits are still flashing,
Push MODE Button. REPEAT will show on display.
Push START/STOP Button to select REPEAT ON or REPEAT OFF.
If you set Repeat ON, the countdown timer will alert you each time it
reaches zero and automatically reset itself for the time you originally
entered. It will also give you a count of how many times it has repeated.
(Up to 99 and rolling over to 0). If you set Repeat OFF, the timer will
countdown to zero and alert you but will not repeat automatically.
You can however manually reset to the original time entered by pushing and
holding the LAP/RESET Button.
Push MODE Button. REMIND will show on display.
Push START/STOP Button to select REMIND ON or REMIND OFF.
With REMIND ON, when the Countdown is set for more than 5 minutes and
less than ten minutes, a reminder alert will be activated at 5 minutes before
zero. When the countdown is set for more than 10 minutes, a reminder alert
will be activated at 10 minutes and at 5 minutes before zero. Select
REMIND OFF if you do not want reminders before zero.
Push LAP /RESET button when settings are completed.
Flashing will stop.
STARTING/STOPPING COUNTDOWN
While in TIMER MODE
Push START/STOP Button to start countdown.
Icon located above seconds digits will flash indicating countdown
timer is activated.
Push START/STOP Button to stop countdown while it is running or
to continue countdown when it is stopped.
QUICK RESETTING of COUNTDOWN TIME (WHILE COUNTDOWN IS
RUNNING OR STOPPED DURING COUNTDOWN)
While in TIMER MODE
Push and Hold LAP/RESET Button
HOLD TO RST (Reset) will show on display.
Hold for 3 seconds.
Vibra LITE 8 is a trademark of GLOBAL ASSISTIVE DEVICES, INC. Page 8