Packet Data Access Points - Nokia N78 User Manual

indicates a protected access point
indicates a packet data access point
indicates a WLAN access point
Tip: You can create internet access points in a
wireless LAN with the WLAN wizard.
To create a new access point, select
point. The device asks to check for available
connections. After the search, connections that are
already available are shown and can be shared by a
new access point. If you skip this step, you are asked
to select a connection method and to define the
settings needed.
To edit the settings of an access point, open one of the
access point groups, select an access point and Edit.
Follow the instructions from your service provider.
Connection name
●
connection.
Data bearer — Select the data connection type.
●
Depending on the data connection you select, only
certain setting fields are available. Fill in all fields
marked with Must be defined
fields can be left empty, unless your service provider
has instructed otherwise.
To use a data connection, your service provider must
support this feature, and if necessary, activate it for
your SIM card.
152
New access
— Enter a name for the
or with a red *. Other

Packet data access points

Press , and select Tools
Connection Destinations
>
and follow the instructions on the screen. Or, open one
of the access point groups, select an access point
marked with , and select Edit.
Follow the instructions from your service provider.
Select from the following:
Access point name — You obtain the access point
●
name from your service provider.
User name — The user name may be needed to
●
make a data connection, and is usually provided by
the service provider.
Prompt password — If you must enter the
●
password every time you log in to a server, or if you
do not want to save your password in the device,
select Yes.
Password — A password may be needed to make
●
a data connection and is usually provided by the
service provider.
Authentication — Select
●
your password encrypted or
password encrypted when possible.
Homepage — Depending on the access point you
●
are setting up, enter the web address or the address
of the multimedia message centre.
Select Options Advanced settings
>
following:
Settings
> >
New access point,
>
Secure to always send
Normal to send your
and from the