Phone Settings; Call Settings - Nokia N78 User Manual

Phone settings

In phone settings, you can edit settings related to
phone calls and network.

Call settings

Press , and select Tools
Call.
Send my caller ID — You can set your phone
●
number to be displayed to (Yes) or hidden from
(No) the person to whom you are calling, or the
value may be set by your service provider when you
make a subscription (Set by
service).
Call waiting — To be alerted for incoming calls
●
(network service) while you are in a call, select
Activate. To check whether the function is
activated, select Check
Reject call with message
●
message to a caller informing why you could not
answer the call, select Yes.
Message text — Write a text to be sent in a text
●
message when you reject a call.
Image in video call — If video is not sent during a
●
video call, you can select a still image to be displayed
instead.
Automatic redial — Select On, and your device
●
makes a maximum of 10 attempts to connect the
Settings Phone
> >
network) (network
status.
— To send a text
call after an unsuccessful call attempt. To stop
automatic redialling, press the end key.
Show call duration
●
want the length of a call to be displayed during the
call.
Summary after call
●
want the length of a call to be displayed after the
>
call.
Speed dial — Select On, and the numbers assigned
●
to the number keys (2 to 9) can be dialled by
pressing and holding the key.
phone number", p. 121.
Anykey answer
●
an incoming call by briefly pressing any keypad key,
except the power key.
Line in use — This setting (network service) is
●
shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which
phone line you want to use for making calls and
sending text messages. Calls on both lines can be
answered irrespective of the selected line. If you
select Line 2 and have not subscribed to this
network service, you are not able to make calls.
When line 2 is selected,
mode.
Tip: To switch between the phone lines, press
and hold # in the standby mode.
Line change — To prevent line selection (network
●
service), select Disable
card. To change this setting, you need the PIN2 code.
— Activate this setting if you
— Activate this setting if you
See "1-touch dial a
— Select On, and you can answer
is shown in the standby
if supported by your SIM
149