Accessories; Drive Roll Kits; Dual Cylinder Mounting Kit; Alternative Magnum Gmaw Gun And Cable Assemblies - Lincoln Electric POWER MIG 256 Operator's Manual

C-1

DRIVE ROLL KITS

Refer to Table C.1 for various drive roll kits that are
available for the POWER MIG
is supplied standard with the POWER MIG
TABLE C.1
Wire Wire Size
.023"-.030" (0.6-0.8 mm)
.035" (0.9 mm)
Solid
.045" (1.1 mm)
Steel
.035"-.045" (0.9-1.1mm)
.040" (1.0mm)
.035" (0.9 mm)
Cored
.045" (1.1 mm)
Aluminum 3/64" (1.2 mm)
.035" (0.9 mm)
K2378-1 Canvas Cover
K468 Spindle Adapter - for 8" (203.2mm) O.D. spool.
K363P READI-REEL™ ADAPTER
The K363P Readi-Reel Adapter mounts to the 2"
spindle. It is needed to mount the 22-30 lb. Readi-
Reels.

DUAL CYLINDER MOUNTING KIT

(K1702-1)
Permits stable side-by-side mounting of two full size
228.6mm dia x 1.524m high(9" dia. x 5' high) gas
cylinders with "no lift" loading. Simple installation and
easy instructions provided. Includes upper and lower
cylinder supports, wheel axles and mounting hard-
ware.

ACCESSORIES

® 256.The item in Bold
® 256.
Drive Roll Kit
KP1696-030S
KP1696-035S
KP1696-045S
KP1696-1
KP1696-2
KP1697-035C
KP1697-045C
KP1695-3/64A
KP1695-035A
POWER MIG
ALTERNATIVE
GUN AND CABLE ASSEMBLIES
The following Magnum
assembly is separately available for use with the
POWER MIG ® 256. Each is rated 200 amps 60% duty
cycle (or 250 amps 40% duty) and is equipped with the
integrated connector, twist-lock trigger connector, fixed
nozzle and insulator, and includes a liner, diffuser, and
contact tips for the wire sizes specified:
Length Part No.
15' (4.6 m) K3081-2
Optional liners for different wire diameters are sold
1
separately, see table D.1 Maintenance Section.

MAGNUM GUN CONNECTION KIT

(Optional K466-6)
Using the optional K466-6 Magnum Connection kit for
the POWER MIG permits use of standard Magnum
200, 300 or 400 gun and cable assemblies.

SPOOL GUN

Remove all input power to the POWER MIG
before proceeding.
--------------------------------------------------------------------------------
The POWER MIG ® 256 provides direct connection and
use of the Spool Gun (with remote speed control).
It also provides gun trigger switch transfer between the
machineʼs use with its feeder gun or the spool gun for
same polarity welding with different wire and gas
processes.
K2490-1 Magnum
K487-25 Magnum
K2445-1 Cable Adapter)
K2445-1 Magnum SG Spool gun Control Cable
Adapter. Allows the K487-25 Magnum SG spool gunʼs
6-pin control cable plug to connect to the POWER
MIG ® 256ʼs 7-pin spool gun control cable receptacle.
256
®
MAGNUM GMAW
®
PRO 250L gun and cable
English Wire Metric Wire
Size 1 Size
.035 – .045" 0.9 – 1.2 mm
®
250LX
®
® SG Spool Gun (requires
C-1
256