Table of Contents
Advertisement
Installation Manual
Prior to installation and use of the product, the following warnings should be observed.
•
Installation and servicing should be done only by qualified service personnel and conform
to all local codes.
•
Power camera only from a UL Listed, Class 2 isolated power supply.
•
Do not remove covers as there is a risk of injury or death by electric shock.
•
Do not touch the image surface of the sensor. If the sensor is accidentally touched, clean
it only with isopropanol.
•
Do not expose the camera sensor to very bright light over a long period of time as this may
damage the CCD. The camera and lens setup must be correct to avoid continual
overexposure to bright light. A lens with an automatic iris is recommended under these
conditions.
•
Before installing the lens, make sure that its back will not touch the CCD sensor or
associated components when it is screwed into the camera.
•
These cameras must only be used in clean, dry, dust-free environments. For outdoor use,
an appropriate protective housing conforming to IP65 or UL50 or better must be used.
•
Only operate your camera between the temperatures of -10
ADCA330CN, ADCA330CP and ADCA470CAFP Models
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However there is no guarantee that the
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try and correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user’s authority to
operated the equipment under FCC rules.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
ADCA470CAFN Model
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
Modifications not expressly approved by the manufacturer could void the user’s authority to
operated the equipment under FCC rules.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Fixed Color Cameras
PRODUCT SAFETY
C and +50
C.
O
O
REGULATORY NOTICES
Hide quick links:
Advertisement
Table of Contents
