NETGEAR Trek PR2000 Quick Start Manual page 6

Set Up Your Trek
¾ To set up your Trek:
1. Record your Trek's WiFi network name (SSID) and WiFi password.
The SSID and WiFi password are on the sticker near the Internet
mode switch. You can write the WiFi settings from the sticker in this
space for easy reference.
SSID:
WiFi password:
2. Connect the Trek to a power source.
Use one of these options:
• AC power connection. Plug the Trek into an AC wall outlet.
• Micro USB connection. Connect a micro USB cable to the Trek
and to a USB port on another device.
AC power connection Micro USB connection
6